5 Easy steps to replace your iPhone 12 screen

If your iPhone 12 display is cracked, not working, or malfunctioning, replacing it with a new LCD screen assembly is an affordable fix. You might be a DIY tech junkie or you're simply trying to save cash on repairs. 

In either case, this repair guide provided by Elite Cell Parts, a leading LCD Display Assembly for iPhone 12 repair part store in Houston USA will walk you through how it's done in five easy steps.

Read on to have a seamless and successful iPhone screen replacement to perform 

Why Replace Your iPhone 12 Screen?

A damaged iPhone 12 screen can cause several issues:

  1. Cracks and shatters can worsen over time.
  2. Touch responsiveness may be affected.
  3. Dead pixels and discoloration can make viewing difficult.
  4. Water and dust may enter through cracks, causing internal damage.
 

Replacing your iPhone 12 screen with a new LCD display assembly can restore full functionality without the need for professional iphone replacement parts services provided by Elite Cell Parts . Let’s dive into the step-by-step process!

 

What You’ll Need:

 

Prior to beginning, ensure you possess the following equipment and replacement items:

 
 
  • Pentalobe Screwdriver (For removal of bottom screws)
 
  • Tri-Point Screwdriver (For interior screws)
  • Plastic Pry Tool or Opening Picks
  • Suction Cup (For lifting the screen)
  • Tweezers
  • Heat Gun or Hair Dryer (For dislodging adhesive)
  • Adhesive Strips (For re-gluing the screen)
  • ESD-Safe Gloves (Optional but suggested)
 

Step 1: Power Off and Remove Screws:

Before starting, turn off your iPhone 12 completely to prevent any accidental damage.

Use a Pentalobe screwdriver to remove the two screws located next to the charging port at the bottom of the phone.

Set the screws aside in a safe place for reassembly.

 

Step 2: Open the iPhone 12:

 
  • Since iPhones are sealed with strong adhesive, you’ll need to loosen it first.
  • Heat the screen edges with a heat gun or hair dryer for 1-2 minutes slowly to loosen the adhesive.
  • Position a suction cup against the bottom edge of the screen and gently pry it open to make a small gap.
  • Stuff a plastic pry tool or opening pick into the gap and work it around the edges to release the screen.
  • Gently pry the screen off without pulling too hard since it is still attached to the motherboard through flex cables.
  •  

Step 3: Remove the Battery and Screen Cables:

Prevent short circuits by removing the battery first.

Find and remove the metal bracket that covers the battery connector by holding on with a Tri-Point screwdriver.

Use tweezers to gently lift the bracket and put it aside.

The plastic pry tool can be used to remove the battery connector.

Then, pull out the bracket that covers the screen's flex cables.

Disconnect the LCD, digitizer, and front sensor cables carefully.

Take out the broken screen entirely.

 

Step 4: Install the New LCD Display Assembly:

 

With the old display out, it is time to put the new one in.

 

If required, flow the earpiece speaker and the front camera assembly from the old screen to the brand new LCD display.



Align the new LCD display assembly of iPhone 12 and attach the flex cables firmly.

 

Reattach metal brackets and fix them using screws.

 

Reinstall the battery.

 

Test the new screen by turning on your iPhone 12 before sealing the device. Test the display, touch, and front camera to verify that all aspects are in working order.

 

Step 5: Reassemble and Seal iPhone 12

 

If all is in working order, you can seal up your phone.

 

Apply fresh adhesive strips along the edges of the frame if necessary.

 

Lower the screen gently into position, nudging it all the way down with your thumbs along the edges to get a good seal.

 

Replace the two Pentalobe screws at the bottom of the phone.

 

Switch on your iPhone 12 and do a final inspection.

 

Last Tips and Warnings:

 

A few words of caution that we at Elite Cell Parts would recommend before you look to perform LCD Display Assembly for iPhone 12 are as follows: 

 
  1. Install only quality replacement components: Use a suitable LCD display assembly for iPhone 12 from a reputed supplier.
 
  1. Be careful with flex cables: They are delicate and may break if you handle them carelessly.
 
  1. Watch out for screws: They are small and easy to misplace.
 
  1. If Face ID fails, make sure you have correctly swapped the front camera assembly.
 

If you're not sure, seek professional assistance: If things don't go right, take your device to a professional.

 

Where to Buy iPhone Replacement Parts?

 

If you require a new LCD display assembly for iPhone 12 or replacement parts for other iPhones, search for online stores that are reputable or repair shops with expertise. Always read customer reviews and confirm the quality before an order can be placed.

 

Replacing your iPhone 12 display can be daunting, however with these five simple steps, you may without difficulty do the restore yourself. Whether you're experiencing issues with a cracked display screen, unresponsive touch, or show issues, a brand new LCD show assembly gets your tool returned to full capability. 

 

If you cannot or do not have the confidence to perform LCD Display Assembly for iPhone 12,yourself then, you need to visit Elite Cell Parts, a leading  iPhone replacement parts store in Houston, USA today. 

 

If this manual helped you, share it with others who may also need a DIY alternative to conducting LCD Display Assembly for iPhone 12. 



Posted in Default Category 14 hours, 5 minutes ago

Comments (0)

No login