The use temperature of purchase welding dust collector is an important basis for design, and the use temperature error sometimes leads to serious consequences. purchase welding dust collector In order to maintain long-term operation, it is necessary to carry out regular maintenance and overhaul of various parts of the equipment. The maintenance methods and steps are generally operated by technical personnel. If the pulse valve fails, it should be eliminated in time, if there are impurities and moisture inside, it should be cleaned, and if the diaphragm is damaged, it should be replaced in time. When shut down, after the process system stops, the pulse dust collector and exhaust fan should be kept working for a period of time to dust the moisture and dust in the equipment, it should be noted that when the dust collector stops working, it is necessary to repeatedly clean the dust collector (manual cleaning can be used), and the dust on the dust filter bag is removed to prevent the influence of moisture and paste the bag. The timing cleaning controller should be used to determine whether the cleaning period is accurate on a regular basis, otherwise it should be adjusted. The use of fixed-resistance pulse controller should regularly check the working condition of the pressure switch, whether the pressure port is blocked, and clean up.
Explain the application characteristics of purchase welding dust collector:
1. Filter bag selected according to the characteristics of wood dust;
Second, it not only overcomes the limitation that the old-fashioned cyclone dust collector is difficult to separate the fine powder particles below 10μm, but also solves the problem that the ordinary bag dust collector is not suitable to deal with the mixed airflow of high dust load;
Three, the cyclone separation and bag filtration two layers of integration, so that it occupies a small site, structure, but also reduce the total resistance of the separation device;
4. No moving parts in the purchase welding dust collector, easy mechanical maintenance;
Fifth, it can not only handle all kinds of wood processing workshops produced by mixed scraps (such as waste shavings, sawdust, wood powder), but also can separate MDF and particle board sanding operations produced by high-load wood powder, and have a good comprehensive separation rate, can meet the strict industrial waste emission standards;
6. The cleaning method and economic cleaning parameters fully reflect the optimal design of the dust collector and energy saving;
7. The filter bag hanging mode is special, which determines the long-term stable operation of the filter material.
purchase welding dust collector generally uses compressed air to blow ash, compressed air contains much oil, water, impurities, if not purified directly into the filter bag, it will make the filter bag contaminated by moisture resulting in condensation. If the dust collector deals with high temperature and high humidity gas, once the cold compressed air is sprayed, the cold and hot intersection will produce condensation on the surface of the filter bag if the dew point temperature is reached, and the adhesion of a large amount of dust will cause compaction.
purchase welding dust collector https://www.kaisenfilter.com/KSJ-1-5B-Welding-Fume-Extractor.html
Comments (0)